Penny & Giles slider for audio mixing consoles

wire functions

red:	voltage input (5V, 35 kOhms to ground)
blue:	ground
yellow:	slider position signal (0 - 23 kOhms)
black:	motor control?
gray:	slider-hand touch sensor

National Instruments DAQ connections:

To read slider position on computer (voltages from 0 to 5 volts):

yellow wire connects to pin 68 (analog channel 0)
blue wire connects to pin 67 (analog input ground)
red wire connects to pin 14 (5 volt power supply)

Miscellaneous info:

Type: P6FM8100
Spec no.: D468050/A
Motor numbers: PPN-13KB09C / 15296PC